B Series 
FS Series
K Series
Rotary
FAQ
| These
are B-Series engine options Short block |
|
Stage 1 (stock rebuild) $1400
For those in need of a stock replacement motor. This in for
you. Brand new factory rods pistons and bearings. With great
tuning, this motor will support 300 plus hp on a super or turbocharger. |
| A core and shipping charges may apply. Options are available. |
| |
Stage 2 (street block) $2500
The above with Pauter rods and Wiseco pistons Great for those
seeking power and reliability. This setup can handle 400+ hp
to the wheels |
| A core and shipping charges may apply. Options are available. |
| |
Stage 3 (X-block) $3100
The ultimate combo take away the worry and stress of building
a complete short block. Complete with Longer Rods for a better ratio, pins are larger to fit the longer rods, rings capable of 30 + psi, bearings, ARP head studs, new oil pump, Gasket set installed,
Head gasket and others sent to complete your installation, installed
front and rear main seals, oil pan etc. up to 700 hp is yours
with this combo. |
A core and shipping charges may apply. Options are available.
2.0 liter Engine is available $3500 |
Head
|
(Stage
1) $1195
Rebuild, pressure test, resurfacing, 3 angle valve job, stage
1 Porting. (providing your valve train parts are in great condition)
A core and shipping charges may apply. Options are available. |
Stage
2 (street) $1695
Rebuild, pressure test, resurfacing, 3 angle valve job, stage
1 Porting. Dual high rev springs, titanium retainers(providing
your valve train parts are in great condition)
A core and shipping charges may apply. Options are available. |
Stage
3(X- Head) $3500
So, you want to make all that power. Here is the
tool to get it done. This is complete with stock or oversize
valves, Full porting, New Custom Cams, seats, locators, titanium
retainers, dual springs good to 10,500 rpm, solid lifters
(shim under bucket) all assembled and adjusted to spec.
A core and shipping charges may apply. Options are available. |
Miata Pistons and Rods
 |
1.6 B6
WISECO 78.5mm-79.5mm W/RINGS 9:1C/R TURBO PISTONS |
$499
set |
1.8 BP
WISECO 83.5mm-84mm 11:1C/R W/RINGS
TURBO SET C/R =9:1 WISECO 83.5mm-85MM W/RING*
|
$499
set |
 |
|
rods will fit 1.6 or 1.8 |
$699
set |
|
| Copyright 2004 RacingMazda.com,
All Rights Reserved. |
|
